(Birko 50 Pie Warmer)

Operation

Connect and switch on the power supply, then switch the Pie Warmer on. The Pie Warmer is

thermostatically controlled and is fitted with an indicator light and thermostat for best results. Once

the thermostat is set to the desired temperature the thermostat will cycle on and off to maintain the

set temperature. The indicator light is designed to cycle on and off to indicate when the thermostat

is heating or alternatively reached the setting. The thermostats will display the current temperature

within the cabinet.

Cleaning, Care and Maintenance

• Ensure that the unit is always switched off and disconnected from the power supply before any

cleaning, maintainence or moving.

• Always allow the unit to cool sufficiently before carrying out cleaning, maintainence or moving.

Safety

• Always ensure that the electrical power cord is not in contact with the pie warmer during use.

Contact with the pie warmer could result in damage to the power cord and cause an electrical

hazard.

• The body of the warmer should be wiped down after each day’s operation; however, additional

cleaning may be required depending on frequency of use. The drip tray, wire racks, and glass

doors can be removed and washed if necessary. Care must be taken to allow the Pie Warmer to

cool down before cleaning, maintaining or moving, remember stainless steel and glass can burn.

• Do not immerse the Pie Warmer in water, or use jet/pressure washers to clean it.

• Warm soapy water is recommended for cleaning. Cleaning agents may cause damage, and

leave harmful residues, when used for a prolonged period on stainless steel.

• This appliance is not intended for use by persons (Including Children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for their

safety.

• Children should be supervised to ensure they do not play with the appliance.

• A Birko dealer or a Recommended Qualified Service Technician should carry out repairs if

required.

For More information call Celebrations Plus 0444 590 517 No Text